RoPump Pumping Station

Introduction

RoPump pumping stations are a compact system consisting of a chamber fitted with a high quality pump, float switch, non-return valves and pedestrian duty cover. The RoPump are quick to install and easy to maintain – they are the ideal solution for outbuildings, extensions, cellars, pool houses and external toilets. They can be used for effluent or sewage depending on the pump, distance and height.

Available in various chamber sizes with single pump or twin pump options and several pump options to suit your application. They are quick to install and easy to maintain.

Sustainable, Reliable, Affordable!

Single Pump Station Applications

Suitable for surface water, effluent or sewage applications. An ideal solution for homes, outbuildings and extensions, cellars, pool houses and external toilets. They can also be used in conjunction with septic tanks and sewage treatment plants to pump treated sewage to higher level drainage fields or watercourses.

Features

• Complete pre-fabricated solution ready for installation
• 625mm, 800mm, 1000mm & 1300mm diameter chambers
• 100omm,1250mm & 1500mm depth chambers
• 4 Pump Options – General, General with Guiderail, Pentax DG82 & Pentax DG102
• Non-return valves and outlet pipe compression coupling as standard
• Fully automatic
• Service and maintenance plans available

Twin Pump Stations Applications

Suitable for surface water, effluent or sewage applications, Roto Twin Pump Stations are ideal for homes or properties where 24 hour storage is required. Quick and simple to install, they require minimal maintenance. They can also be used in conjunction with septic tanks and sewage treatment plants to pump treated sewage to higher level drainage fields or watercourses.

Features

• Complete pre-fabricated solution ready for installation
• 625mm, 800mm, 1000mm & 1300mm diameter chambers
• 1000mm & 1250mm depth chambers
• General, Pentax & DAB pump options
• Guiderail options on General & DAB Pumps
• Quick connection outlet couplings
• 110 mm or 160 mm inlet connections
• Easy access for maintenance
• Service and maintenance plans available
• Optional monitoring systems

Key factors to size your system

Several factors must be considered to ensure the correct pump station and pumps are suitable for your application. These include:

• Application: domestic, residential or commercial
• Material application: sewage, effluent or surface water
• Inlet depth (below ground level)
• Pumping distance and lift
• Electrical supply

Additional Equipment

• Alarms
• Basket
• Neck Extensions
• Control Panels
• Control Panel Cabinets
• External fittings shafts
• 1800mm & 2300mm Pump Stations with single or twin neck options

Material

Manufactured in polyethylene, which is 100% recyclable and ribbed for reinforcement. Roto supply the RoPump pumping station rotomoulded tanks in one-piece from 625mm x 1,000mm to 1,200 x 1,250. The tanks have a 600mm diameter plastic cover, which can have one or two openings, with a seal and four stainless steel screws, making them watertight. The Roto tank wall thickness ranges from 8-14mm to give the tank its stiffness.

Catalogues

Roto Water Catalogue